@article{DUMANSKA_DOTSENKО_SYDOROVA_MAKARENKO_2021, title={PAVEMENTS OF FPE WITH UNDERSIDE SURFACE OF PYRAMIDAL AND RIBBED ELEMENTS }, volume={4}, url={//ojs.kntu.net.ua/index.php/aqmm/article/view/189}, DOI={10.32782/KNTU2618-0340/2021.4.2.2.9}, abstractNote={<p><em>When improvement of house adjoining territories, sidewalks, garden paths, parking lots and areas for various purposes, pavements of figured paving elements (FPE) made of concrete are used in large volumes.</em> <em>During their operation, various deformations are sometimes observed, the reasons for which may be the wrong choice of the constructive-technological solution and the low bearing capacity of the </em><em>pavement</em><em>. In order to prevent deformations, it is necessary to search, develop, research and further introduce into construction production new pavements of FPE with improved quality characteristics.</em></p> <p><em>The article is devoted to the improvement of constructive-technological solutions of pavements, foot ways, and areas for various purposes, made of figured paving elements. Two variants of new paving elements with an underside having a modified geometric shape are proposed – with one pyramidal element located in the center, and ribbed prismatic elements located along the perimeter. Hypotheses about the advantages of the proposed FPE variants have been developed. An increase in the area of the underside will allow the external load to be transferred to a larger volume of the underlying structural layer of the pavement, which will enable the pavement to take the increased load. The shape of the underside during the installation of FPE contributes to additional compaction of the underlying sand layer and a decrease in the possibility of horizontal displacement when a horizontal load is applied to the pavement. Consequently, the quality characteristics of the proposed pavement will improve – bearing capacity and durability.</em></p> <p><em>The calculation of the heights of the upper prismatic parts of the new variants of the FPE with the proposed parameters of the underside and the shape in plan, the results of which indicate their insignificant decrease relative to the height of the traditional FPE with a flat underside.</em></p> <p><em>To confirm the hypotheses, the plan of experiments on the influence of a long-term vertically applied load on the FPE settlement and the density of the underlying structural layer is proposed. The factors influencing the operation of the pavement and the output parameters are selected. The necessary equipment and materials were selected.</em></p> <p><em>При впорядкуванні прибудинкових територій, тротуарів, садово-паркових доріжок, автостоянок і майданчиків різного призначення у великих обсягах використовують покриття з фігурних елементів мостіння (ФЕМ), виконаних з бетону. При їх експлуатації іноді спостерігаються різні деформації, причинами яких можуть бути невірний вибір конструктивно-технологічного рішення і низька несуча здатність покриття. З метою запобігання деформацій необхідно проводити пошук, розробку, дослідження та подальше впровадження в будівельне виробництво нових покриттів із ФЕМ з поліпшеними якісними характеристиками.</em></p> <p><em>Стаття присвячена удосконаленню конструктивно-технологічних рішень покриттів тротуарів, пішохідних доріжок, майданчиків різного призначення, виконаних з фігурних елементів мостіння. Запропоновано два варіанти нових елементів мостіння з нижньою основою, що має змінену геометричну форму – з одним пірамідальним елементом, розташованим в центрі, і з ребристих призматичних елементів, розташованих по периметру. Розроблено гіпотези про переваги запропонованих варіантів ФЕМ. Збільшення площі нижньої основи дозволить передавати зовнішнє навантаження на більший об’єм нижнього несучого конструктивного шару дорожнього одягу, що дасть можливість покриттю сприймати збільшене навантаження. Форма нижньої основи при влаштуванні ФЕМ сприяє додатковому ущільненню нижнього піщаного шару і зниженню можливості горизонтального зсуву у випадку прикладання горизонтального навантаження до покриття. Отже, підвищаться якісні характеристики запропонованого покриття – несуча здатність і довговічність.</em></p> <p><em>Зроблено розрахунок висот верхніх призматичних частин нових варіантів ФЕМ при запропонованих параметрах нижньої основи і форми в плані, результати якого вказують на незначне їх зменшення щодо висоти традиційної ФЕМ з пласкою основою.</em></p> <p><em>Для підтвердження гіпотез запропонований план проведення експериментів по впливу тривалого вертикально прикладеного навантаження на осідання ФЕМ і щільність нижнього конструктивного шару. Обрані фактори, що впливають на роботу покриття і вихідні параметри. Підібрані необхідне обладнання і матеріали.</em></p>}, number={2.2}, journal={APPLIED QUESTIONS OF MATHEMATICAL MODELLING}, author={DUMANSKA, V.V. and DOTSENKО Ju.V. and SYDOROVA, N.V. and MAKARENKO, L.M.}, year={2021}, month={Жов}, pages={94-101} }